技术参数Technical parameters
用于有功功率的和越限继电器输出。For active power measurement and over over limit relay output.
指示精度Accuracy: Class 1.5。
环境温度Ambient temperature range:-25℃ to +55℃。
外壳防护Housing protection:IP44。
耐振动Vibration resistance:2-100HZ≤0.7g。
耐电压Dielectric test:AC2.6KV,50HZ,1min。
设置点参数Set point: 25~125%×Pn(Pn:满度值Full scale value);时间延迟Time delay: 0~20S.
规格参数及测量范围 Specification parameter and Measuring range:同as F96-W
电源功耗Power:Consumption :≤3VA
输出触点容量Contact rating:AC250V ,3A;DC28V,3A.
产品分类 Kind of products
型号 Type | 展开角 angle | 外形尺寸(mm) Outline(AXBXC) | 开孔尺寸 Cut-out(mm) | 结构代码 Structure code | 外形图 Outline drawing | 接线图 Wiring drawing | 重量(Kg) Weight |
F96B-WB,Q96-WTCAA,51L6 | 90° | 96X96X102 | 92+0.5X92+0.5 | A | 图Figure 1 | 图Figure 3 | 0.75 |
F96B-W,Q96-WTCZAA,51L5 | 240° | 96X96X102 | 92+0.5X92+0.5 | B | 图Figure 2 | 图Figure 3 | 0.95 |
外形图 Outline drawing
接线图Wiring diagram
使用说明Directions
使用前应检查仪表接线正确无误,输入电压、电流规格应与铭牌标识相符。Before use,the instrument wiring should be checked correctly,and the input voltage and current specifications should be consistent with the nameplate identification.
仪表接线端子排列见图3。The instrument terminal arrangement is shown in figure 3.
当接通电源后,绿色指示灯亮,表示仪表处于工作状态。When power supply is switched on,green LED for indication “power on”is lit,which indicates devise is running correctly.
当功率超过设置点时,黄色指示灯(P>)点亮,经过所设置的时间延迟,红色指示灯(RELAY)点亮,表示继电器已发生动作而改变状态。When set point for power has been exceeded,“P>”yellow LED is lit,and after time expired,red LED is lit and alarm contact is activated.
特殊用途仪表请在型号前半部的数字后加“J”(仅限于240°仪表),如F96JB-W。Specify“J”for special meter.(Only for Pointer deflection 240 degree meter)as:F96JB-W.